Building a brick fence
Nowadays there are many modifications of facing bricks, as well as its colors, which in turn provides different options for the construction of fences. In addition, fences made of facing bricks will provide reliable protection, as well as serve for many years. So, the construction of this fence begins with the foundation casting. The depth of the foundation should be from 50 to 80 cm. It is important that the foundation be poured as smoothly as possible so that it is easier to lay the first row of bricks on the level. To do this, it is necessary to install the formwork to the maximum level. At that distance, which is planned to build a column, it is necessary to concrete support columns. For this fit a metal pipe with a diameter of 10 mm. These pillars should also be on a level. After the foundation has been poured, and it has been settled for a couple of days, you can start laying bricks. In the example shown in the illustration, two colors are combined - red and yellow.First, the fence sole is laid at the edges of a red brick whole basement with a torn spoon. The space between these bricks must also be poured with concrete. Next, you need to proceed to the construction of the fence column. To do this, it is necessary to calculate an approximately equal distance between the columns. In order for the columns to be at the same level, and each row has the same height, it is necessary to use a fishing line, which is pulled on each new row, from the two extreme columns. To the support column, which was fixed in the foundation inside the column, you need to weld the mortgage every 6 rows of columns. A total of 23 rows in columns. Therefore, in each column it will be possible to withdraw three mortgages from each side. In addition, to strengthen the colon, they are recommended to concrete, filling the void inside with a solution.In this case, two types of columns are used. The first type of columns used in the span of the fence and consists of 4 red bricks with a semicircle. In addition to them, three more columns are used, between which the gate and the gate will be fixed. These columns consist of 4 semicircular red bricks and 2 yellow bricks. In these three columns, two mortgages are welded vertically to the pole. The distance between them depends on the distance of the hinges on the gate and the gate, which will subsequently be attached to these mortgages. As a rule, the gate and the gate are made to order, and you can know in advance the distance between the loops.
New business literature for those who are building a career
Handmade Violet Wedding Envelopes
Donald Trump convicted again in social networks
Stretch shoes at home
Creators of the Games of the Thrones will remove Star Wars